To Next Page

To Previous Page

Configuring MAC Locking set maclock

24-6 Security Configuration

Parameters

Defaults

Ifport_stringisnotspecified,MAClockingwillbedisabledonallports.

Mode

Switchcommand,Read‐Write.

Example

ThisexampleshowshowtodisableMAClockingonfe.2.3:

Matrix(rw)->set maclock disable fe.2.3

set maclock

UsethiscommandtocreateastaticMACaddressandenableordisableMAClockingforthe

specificMACaddressandport.

Syntax

set maclock mac_address port_string {create | enable | disable}

Parameters

Defaults

None.

Mode

Switchcommand,Read‐Write.

Usage

ConfiguringoneormoreportsforMAClockingrequiresgloballyenablingitonthedevicefirst

usingthesetmaclockenablecommandasdescribedin“setmaclockenable”onpage 24‐5.

Whencreatedandenabled,thisallowsonlytheendstationdesignatedbytheMACaddressto

participateinframe

relay.

port_string (Optional)DisablesMAClockingonspecificport(s).Foradetailed

descriptionofpossiblep o rt_stringvalues,referto“PortStringSyntax

UsedintheCLI”onpage 4 ‐2.

mac_address SpecifiestheMACaddressforwhichMAClockingwillbecreated,

enabledordisabled.

port_string Specifiestheportonwhichtocreate,enableordisableMAClocking.

Foradetaileddescriptionofpossibleport_stringvalues,referto“Port

StringSyntaxUsedintheCLI”onpage 4‐2.

create Establishesa

MAClockingassociationbetweenthespecifiedMAC

addressandport.Createautomatically enablesMAClockingbetween

thespecifiedMACaddressandport.

enable|disable EnablesordisablesMAClockingbetweenthespecifiedMACaddress

andport.

Enterasys Matrix DFE-Gold Series User Manual

Questions and Answers: