Enterasys Matrix DFE-Gold Series User Manual

Configuring Node Aliases show nodealias mac
14-2 Node Alias Configuration
Defaults
Ifport‐stringisnotspecified,nodealiaspropertieswillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Usage
Nodealiasesaredynamicallyassigneduponpacketreceptiontoportsenabledwithanaliasagent,
whichisthedefaultsettingonEnterasysMatrixSeriesdevices.Nodealiasescannotbestat ically
created,butcanbedeletedusingtheclearnodealiascommand(“clearnodealias”onpage 14‐7).
Example
Thisexample(aportionofthecommandoutput)showshowtodisplaynodealiaspropertiesfor
ge.3.12:
Matrix(rw)->show nodealias ge.3.12
Alias ID = 1533917044 Active = true
Vlan ID = 1 MAC Address = 00-e0-63-04-7b-00
Protocol = ip Source IP = 63.214.44.63
Table 14‐1providesanexplanationofthecommandoutput.
show nodealias mac
UsethiscommandtodisplaynodealiasentriesbasedonMACaddressandprotocol.
Syntax
show nodealias mac mac_address [ip | apl | mac | hsrp | dhcps | dhcpc | bootps |
bootpc | ospf | vrrp | ipx | xrip | xsap | ipx20 | rtmp | netBios | nbt | bgp |
rip | igrp | dec | bpdu | udp] [port-string]
Table 14-1 show nodealias Output Details
Output... What it displays...
Alias ID Alias dynamically assigned to this port.
Active Whether or not this node alias entry is active.
Vlan ID VLAN ID associated with this alias.
MAC Address MAC address associated with this alias.
Protocol Networking protocol running on this port.
Address / Source IP When applicable, a protocol-specific address associated with this
alias.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English