Enterasys Matrix DFE-Gold Series

Configuring Policy Profiles show policy profile
8-2 Policy Classification Configuration
Configuring Policy Profiles
Purpose
Toreview,create,changeandremovepolicyprofilesformanagingnetworkresources.
Commands
show policy profile
Usethiscommandtodisplaypolicyprofileinformation.
Syntax
show policy profile {all | profile-index [consecutive-pids] [-verbose]}
Parameters
Defaults
Ifoptionalparametersarenotspecified,summaryinformationwillbedisplayedforthespecified
indexorallindexes.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaypolicyinformationforpolicyprofile11:
Matrix(rw)->show policy profile 11
Profile Index :11
Profile Name :MacAuth1
For information about... Refer to page...
show policy profile 8-2
set policy profile 8-3
clear policy profile 8-5
show policy invalid 8-5
set policy invalid action 8-6
clear policy invalid action 8-6
Assigning Classification Rules to Policy Profiles 8-7
all|profile‐index Displayspolicyinformationforallprofileindexesoraspecificprofile
index.
consecutive‐pids (Optional)Displaysinformationforspecifiedconsecutiveprofile
indexes.
‐verbose (Optional)Displaysdetailedinformation.