Enterasys Matrix DFE-Gold Series

clear spantree hello Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-25
Example
ThisexampleshowshowtogloballysettheSpanningTreehelloti meto10seconds:
Matrix(rw)->set spantree hello 10
clear spantree hello
UsethiscommandtoresettheSpanningTreehelloti me tothedefaultvalue.
Syntax
clear spantree hello
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtogloballyresettheSpanningTreehellotime:
Matrix(rw)->clear spantree hello
show spantree maxage
UsethiscommandtodisplaytheSpanningTreemaximumagingtime.
Syntax
show spantree maxage
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaytheSpanningTreemaximumagingtime:
Matrix(rw)->show spantree maxage
Bridge Max Age Time is set to 20 seconds