Enterasys Matrix DFE-Gold Series User Manual

show radius-snooping flow Understanding RADIUS Snooper
Enterasys Matrix DFE-Gold Series Configuration Guide 26-9
show radius-snooping flow
Usethiscommandtodisplayinformationforallflowsorthespecifiedindexentryintheflow
table.
Syntax
show radius-snooping flow {index | all}
Parameters
Defaults
None.
Mode
Read‐Write.
Usage
Usetheindextospecifyaparticularflowtodisplay,otherwiseuseall.
Example
Thisexampledisplaystheflowinformationforindex 1:
Matrix(rw)->show radius-snooping flow 1
FlowID Client IP Server IP UDP Port Validation
1 192.10.20.5 192.10.10.10 1812 Enabled
Number of current sessions : 17
Number pending : 4
Total Sessions: : 85
Total RADIUS Access Requests : 242
Table 26-2 Radius-Snooping Port Settings
Output... What it displays...
Port Specifies the port(s) currently enabled for RS.
Port State Specifies the actual port state.
Timeout Specifies the amount of time in seconds before the session will be terminated
if no response is seen from the RADIUS server once a request is seen from
the client.
Drop State Specifies whether Drop State is enabled or disabled for sessions on this port.
Allowed Specifies the maximum number of sessions allowed by license for this port.
Allocated Specifies the number of allocated sessions as set in the command set radius-
snooping port on page 26-4.
index Specifiesaspecificflowtableindexentrytobedisplayed.
all Specifiesthatallflowtableentriesaretobedisplayed.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English