Enterasys Matrix DFE-Gold Series

Configuring Multiple Authentication show multiauth station
27-8 MultiAuth Configuration
show multiauth station
Usethiscommandtodisplaymultipleauthenticationstation(enduser)entries.
Syntax
show multiauth station [mac address] [port port-string]
Parameters
Defaults
Ifnooptionsarespecified,multipleauthenticationstationentrieswillbedisplayedforallMAC
addressesandports.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationstationentries.Inthiscase,twoend
userMACaddressesareshown:
Matrix(rw)->show multiauth station
Port Address type Address
------------ ------------ ------------------------
fe.1.20 mac 00-10-a4-9e-24-87
fe.2.16 mac 00-b0-d0-e5-0c-d0
clear multiauth station
Usethiscommandtoclearoneormoremultipleauthenticationstationentries.
Syntax
clear multiauth station [mac address] port port-string
Parameters
Defaults
Ifnotspecified,multipleauthenticationstationentrieswillbeclearedforallMACaddresses.
macaddress (Optional)Displaysmultipleauthenticationstationentriesforspecific
MACaddress(es).
portport‐string (Optional)Displaysmultipleauthenticationstationentriesforspecific
port(s).
macaddress (Optional)Clearsmultipleauthenticationstationentriesforspecific
MACaddress(es).
portport‐string Specifiestheport(s)forwhichtoclearmultipleauthenticationstation
entries.