clear netflow template Configuring NetFlow
Enterasys Matrix DFE-Gold Series Configuration Guide 15-11
clear netflow template
UsethiscommandtoresettheVersion9templaterefreshrateand/ortimeoutvaluestotheir
defaultvalues.
Syntax
clear netflow template {[refresh-rate] [timeout]}
Parameters
Defaults
Atleastoneoftherefresh‐rateortimeoutparametersmustbespecified,althoughbothcanbe
specifiedononecommandline.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoreturntheVersion9templatepacketrefreshrateto20packetsandthe
timeoutvalueto30minutes:
Matrix(rw)->set netflow template refresh-rate 50 timeout 30
refresh‐rate Clearthetemplatepacketrefreshratetothedefaultvalueof20packets.
timeout Clearthetemplatetimeouttothedefaultvalueof30minutes.