Enterasys Matrix DFE-Gold Series

set policy port Assigning Classification Rules to Policy Profiles
Enterasys Matrix DFE-Gold Series Configuration Guide 8-17
set policy port
Usethiscommandtoassignanadministrativeruletoaport.
Syntax
set policy port port-name admin-id
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Thesetpolicyrulecommand(“setpolicyrule”onpage 8‐13)usedwiththeadmin‐profile
parameterwillassociateaclassificationrulewithapolicyprofileindexnumber,thusmakingan
administrativerule.
Example
Thisexampleshowshowtoassignanadministrativerulewithanindexof20toportfe.1.3:
Matrix(rw)->set policy port fe.1.3 20
show policy allowed-type
Usethiscommandtodisplayalistofcurrentlysupportedtrafficrulesappliedtothe
admininstrativeprofileforoneormoreports.
Syntax
show policy allowed-type port-string [-verbose]
Parameters
Defaults
If‐verboseisnotspecified,summaryinformationwillbedisplayed.
Mode
Switchcommand,Read‐Only.
port‐name Specifiestheport(s)onwhichtosetassignanadministrativerule.Fora
detaileddescriptionofpossibleport‐stringvalues,referto“PortString
SyntaxUsedintheCLI”onpage 4‐2.
admin‐id Specifyapolicyprofileindexnumberwithavalidrangeof[1..63].
port‐string Specifiesport(s)forwhichtodisplaytrafficrules.
‐verbose (Optional)Displaysdetailedinformation.