Enterasys Matrix DFE-Gold Series

set snmp notifyprofile Configuring SNMP Notification Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 5-39
set snmp notifyprofile
UsethiscommandtocreateanSNMPnotifyfilterprofileconfiguration.
Syntax
set snmp notifyprofile profile targetparam targetparam [volatile | nonvolatile]
Parameters
Defaults
Ifstoragetypeisnotspecified,nonvolatile(permanent)willbeapplied.
Mode
Switchcommand,Read‐Write.
Usage
Thisassociatesanotificationfilter,createdwiththesetsnmpnotifyfiltercommand(“setsnmp
notifyfilter”onpage 5‐37),toasetofSNMPtargetparameterstodeterminewhichmanagement
targetsshouldnotreceiveSNMPnotifications.
Example
ThisexampleshowshowtocreateanSNMPnotifyprofilenamedarea51andassociateatarget
parametersentry.
Matrix(rw)->set snmp notifyprofile area51 targetparam v3ExampleParams
clear snmp notifyprofile
UsethiscommandtodeleteanSNMPnotifyprofileconfiguration.
Syntax
clear snmp notifyprofile profile targetparam targetparam
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
profile SpecifiesanSNMPfilternotifyname.
targetparam
targetparam
SpecifiesanassociatedentryintheSNMPTargetParamsTable.
volatile|nonvolatile (Optional)Specifiesastoragetype.
profile SpecifiesanSNMPfilternotifynametodelete.
targetparam
targetparam
SpecifiesanassociatedentryinthesnmpTargetParamsTable.