Enterasys Matrix DFE-Gold Series

clear policy allowed-type Assigning Classification Rules to Policy Profiles
Enterasys Matrix DFE-Gold Series Configuration Guide 8-19
Mode
Switchcommand,Read‐Write.
Examples
Thisexampleshowshowtoallowonlyruletype1(sourceMACaddressclassification)tobe
appliedtotheadminprofileforportge.1.5:
Matrix(rw)->set policy allowed-type ge.1.5 traffic-rule 1
Thisexampleshowshowtoclearonlyruletype27(VLANclassification)fromtheallowedrule
typelistonportge.1.5.Anyotherallowedruletypesontheportwillstillremainassignedtothat
port:
Matrix(rw)->set policy allowed-type ge.1.5 traffic-rule 27 clear
clear policy allowed-type
Usethiscommandtoclearthelistoftrafficrulescurrentlyassignedtotheadminprofileforoneor
moreports.Thiswillreassignthedefaultsetting,whichisallrulesareallowed.
Syntax
clear policy allowed-type port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Thiscommandwillreassignthedefaultsetting,whichisallrulesareallowed.
Example
Thisexampleshowshowtocleartheallowedrulelistfromportge.1.5:
Matrix(rw)->clear policy allowed-type ge.1.5
clear policy port-hit
Usethiscommandtoclearruleporthitindicationsononeormoreports.
Syntax
clear policy port-hit {all | port-list port-list}
Parameters
port‐string Specifiesport(s)onwhichtocleartrafficrules.
all|port‐listport‐list Clearsporthitindicationsonallportsorononeormorespecifiedports.