Enterasys Matrix DFE-Gold Series

Understanding RADIUS Snooper set radius-snooping initialize
26-6 RADIUS Snooping Configuration
set radius-snooping initialize
UsethiscommandtoterminateallRSsessionsonthesystemforthespecifiedportorMAC
address.
Syntax
set radius-snooping initialize {port port-string | mac-address}
Parameters
Defaults
None.
Mode
Read‐write.
Example
ThisexampleterminatesallRSsessionsassociatedwithportge.1.1byinitializingtheport:
Matrix(rw)->set radius-snooping initialize port ge.1.1
clear radius-snooping all
UsethiscommandtoresetallRSconfigurationtothedefaultvaluesforthissystem.
Syntax
clear radius-snooping all
Parameters
None.
Defaults
None.
Mode
Read‐Write.
Example
ThisexampleresetsallRSconfigurationtothedefaultsettingforthissystem:
Matrix(rw)->clear radius-snooping all
portport‐string Specifiestheport(s)toinitialize.Use*.*.*forallports.
mac‐address SpecifiestheMACaddresstoinitialize.