Enterasys Matrix DFE-Gold Series

Configuring NetFlow clear netflow port
15-8 NetFlow Configuration
clear netflow port
UsethiscommandtoreturnaporttothedefaultNetFlowcollectionstateofdisabled.
Syntax
clear netflow port port-string
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtodisableNetFlowcollectiononportge.1.1:
Matrix(rw)->clear netflow port ge.1.1
set netflow export-version
UsethiscommandtosettheNetFlowflowrecordformatusedtoexportdata.
Syntax
set netflow export-version {5 | 9}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Usage
Referto“VersionSupport”onpage 15‐2formoreinform ationaboutNetFlowversionsupport.
Usetheshownetflowconfigcommand(“shownetflow”onpage 15‐3)todisplaythecurrent
NetFlowversion.
port‐string SpecifiestheportorportsonwhichtodisableNetFlowcollection.
5|9 SpecifiestheNetFlowflowrecordformattousewhenexporting
NetFlowpackets,eitherVersion5or9.
The default is Version 5.