Enterasys Matrix DFE-Gold Series

Configuring SNMP MIB Views show snmp view
5-22 SNMP Configuration
Configuring SNMP MIB Views
Purpose
ToreviewandconfigureSNMPMIBviews.SNMPviewsmapSNMPobjectstoaccessrights.
Commands
show snmp view
UsethiscommandtodisplaytheMIBconfigurationforSNMPv3view‐basedaccess(VACM).
Syntax
show snmp view [viewname] [subtree oid-or-mibobject] [volatile | nonvolatile |
read-only]
Parameters
Defaults
Ifnoparametersarespecified,allSNMPMIBviewconfigurationinformationwillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaySNMPMIBview configurationinformation:
Matrix(rw)->show snmp view
--- SNMP MIB View information ---
View Name = All
Subtree OID = 1
Subtree mask =
For information about... Refer to page...
show snmp view 5-22
show snmp context 5-23
set snmp view 5-24
clear snmp view 5-25
viewname (Optional)DisplaysinformationforaspecificMIBview.
subtreeoid‐or‐
mibobject
(Optional)DisplaysinformationforaspecificMIBsubtreewhen
viewnameisspecified.
volatile|nonvolatile
|read‐only
(Optional)Displaysentriesforaspecificstoragetype.