Enterasys Matrix DFE-Gold Series

clear spantree maxconfigurablestps Configuring Spanning Tree Bridge Parameters
Enterasys Matrix DFE-Gold Series Configuration Guide 6-13
Example
ThisexampleshowshowtosettheSTPmaxconfigsto8:
Matrix(rw)->set spantree maxconfigurablestps 8
clear spantree maxconfigurablestps
UsethiscommandtoclearthesettingforthemaximumnumberofuserconfigurableSpanning
Treeinstances.
Syntax
clear spantree maxconfigurablestps
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtocleartheSTPmaxconfigssetting:
Matrix(rw)->clearspantree maxconfigurablestps
show spantree mstilist
UsethiscommandtodisplayalistofMultipleSpanningTree(M ST)instancesconfiguredonthe
device.
Syntax
show spantree mstilist
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayalistofMSTinstances.Inthiscase,SID2hasbeenconfigured:
Matrix(rw)->show spantree mstilist
Configured Multiple Spanning Tree instances: 2