Configuring Spanning Tree Bridge Parameters show spantree spanguardtrapenable
6-40 Spanning Tree Configuration
Example
Thisexampleshowshowtounlockportfe.1.16:
Matrix(rw)->clear spantree spanguardlock fe.1.16
show spantree spanguardtrapenable
UsethiscommandtodisplaysthestateoftheSpanningTreespanguardtrapfunction.
Syntax
show spantree spanguardtrapenable
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaythestateofthe spanguardtrapfunction:
Matrix(rw)->show spantree spanguardtrapenable
Span Guard Trap is set to enable
set spantree spanguardtrapenable
UsethiscommandtoenableordisablethesendingofanSNMPtrapmessagewhenspanguard
detectsthatanunauthorizedporthastriedtojointheSpanningTree.
Syntax
set spantree spanguardtrapenable {disable | enable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtodisablethespanguardtrapfunction:
Matrix(rw)->set spantree spanguardtrapenable disable
disable|enable Disablesorenablesthespanguardtrap function.