clear lldp port tx-tlv Link Layer Discovery Protocol and LLDP-MED
Enterasys Matrix DFE-Gold Series Configuration Guide 3-37
Defaults
Atleastoneapplica tion (orall)andonepolicyparametermustbespecified.
Mode
Switchcommand,Read‐Write.
Example
Thisexamplereturnsallnetworkpolicyvaluesforallapplicationsonportge.1.1totheirdefault
values.
Matrix(rw)->clear lldp port network-policy all state tag vid cos dscp ge.1.1
clear lldp port tx-tlv
UsethiscommandtocleartheoptionalLLDPandLLDP‐MEDTLVstobetransmittedin
LLDPDUsbythespecifiedportorportstothedefaultvalueofdisabled.
Syntax
clear lldp port tx-tlv {[all] | [port-desc] [sys-name] [sys-desc] [sys-cap] [mgmt-
addr] [vlan-id] [stp] [lacp] [gvrp] [mac-phy] [poe] [link-aggr] [max-frame] [med-
cap] [med-pol] [med-loc] [med-poe]} port-string
Parameters
tag (Optional)Clearthetagvalueoftheapplicationbeingconfiguredto
untagged.
vid (Optional)CleartheVLANidentifierfortheporttothedefaultvalueof
1.
cos (Optional)CleartheLayer2prioritytobeusedfortheapplicationbeing
configuredtothedefaultvalueof0.(Avalueof
0representsuseofthe
defaultpriorityasdefinedinIEEE802.1D.)
dscp (Optional)CleartheDSCPvaluetobeusedtoprovideDiffservnode
behaviorfortheapplicationbeingconfiguredtothedefaultvalueof0.
(Avalueof0representsuseofthedefaultDSCPvalueasdefinedin
RFC2475.)
port-string
Specifiestheportorrangeofportstobeaffected.
all DisablesalloptionalTLVsfrombeingtransmittedinLLDPDUs.
port‐desc DisablesthePortDescriptionoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
sys‐name DisablestheSystemNameoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
sys‐desc DisablestheSystemDescriptionoptionalbasicLLDPTLVfrombeing
transmittedin
LLDPDUs.
sys‐cap DisablestheSystemCapabilitiesoptionalbasicLLDPTLVfrombeing
transmittedinLLDPDUs.
mgmt‐addr DisablestheManagementAddressoptionalbasicLLDPTLVfrom
beingtransmittedinLLDPDUs.
To Next Page
Loading...
Need help?
General