Enterasys Matrix DFE-Gold Series

Configuring Priority to Transmit Queue Mapping set port priority-queue
22-6 Port Priority and Rate Limiting Configuration
Examples
Thisexampleshowshowtodisplaypriorityqueueinformationforfe.1.7.Inthiscase,theframes
shownwithapriorityof0or3aretransmittedaccordingtothetransmitpriorityqueueof1(the
secondlowesttransmitpriority);frameswith1or2priority,atthelowesttransmitpriorityof
0;
frameswith4or5priority,atthesecondhighesttransmitpriorityof2;andframeswith6or7
priority,atthehighesttransmitpriorityof3:
Matrix(rw)->show port priority-queue fe.1.7
fe.1.7 Priority TxQueue
---------- -------- -------
0 1
1 0
2 0
3 1
4 2
5 2
6 3
7 3
Thisexampleshowshowtodisplaythetransmitqueuesassociatedwithpriority3.
Matrix(rw)->show port priority-queue 3
fe.1.7 Priority TxQueue
---------- -------- -------
3 1
fe.1.8 Priority TxQueue
---------- -------- -------
3 1
fe.1.9 Priority TxQueue
---------- -------- -------
3 1
set port priority-queue
Usethiscommandtomap802.1D(802.1p)prioritiestotransmitqueues.
Syntax
setportpriority‐queueport‐stringpriorityqueue