Enterasys Matrix DFE-Gold Series

Configuring SNMP MIB Views set snmp view
5-24 SNMP Configuration
Mode
Switchcommand,Read‐Only.
Usage
AnSNMPcontextisacollectionofmanagementinformationthatcanbeaccessedbyanSNMP
agentorentity.ThedefaultcontextallowsallSNMPagentstoaccessallmanagementinformation
(MIBs).Whencreatedusingthesetsnmpaccesscommand(“setsnmpaccess”onpage 5‐20),other
contextscanbe
appliedtolimitaccesstoasubsetofmanagementinformationandtopermit
SNMPaccessfromoneormoreroutingmodules.
Example
ThisexampleshowshowtodisplayalistofallSNMPcontextsknowntothedevice:
Matrix(rw)->show snmp context
--- Configured contexts:
default context (all mibs)
router
set snmp view
UsethiscommandtosetaMIBconfigurationforSNMPv3view‐basedaccess(VACM).
Syntax
set snmp view viewname viewname subtree subtree [mask mask] [included | excluded]
[volatile | nonvolatile]
Parameters
Defaults
•Ifnotspecified,maskwillbesetto255.255.255.255
•Ifnotspecified,subtreeusewillbeincluded.
•Ifstoragetypeisnotspecified,nonvolatile(permanent)willbeapplied.
Mode
Switchcommand,Read‐Write.
viewnameviewname SpecifiesanameforaMIBview.
subtreesubtree SpecifiesaMIBsubtreename.
maskmask (Optional)Specifiesabitmaskforasubtree.
included|excluded (Optional)Specifiessubtreeuse(default)ornosubtreeuse.
volatile|nonvolatile (Optional)Specifiestheuseoftemporaryorpermanent(default)
storage.