Enterasys Matrix DFE-Gold Series

Resetting the Device reset at
2-96 Startup and General Configuration
reset at
Usethiscommandtoscheduleasystemresetataspecificfuturetime.Thisfeatureisusefulfor
loadinganewbootimage.
Syntax
reset at hh:mm [mm/dd] [reason]
Parameters
Defaults
•Ifmonthanddayare notspecified,theresetwillbescheduledforthefirstoccurrenceofthe
specifiedtime.
•Ifareasonisnotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Examples
Matrix(rw)‐>resetat20:0010/12Thisexampleshows howtoschedulearesetat8p.m.onOctober
12:
Reset scheduled at 20:00:00, Sat Oct 12 2002
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 20:00:00, Sat Oct 12 2002 (in 1 day 5 hours 40 minutes
Thisexampleshowshowtoschedulearesetataspecificfuturetimeandincludeareasonforthe
reset:
Matrix(rw)->reset at 20:00 10/12 Software upgrade to 6.1(1)
Reset scheduled at 20:00:00, Sat Oct 12 2002
Reset reason: Software upgrade to 6.1(1)
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 20:00:00, Sat Oct 12 2002 (in 1 day 5 hours 40 minutes
reset in
Usethiscommandtoscheduleasystemresetafteraspecifictime.Thisfeature isusefulfor
loadinganewbootimage.
Syntax
reset in hh:mm [reason]
hh:mm Schedulesthehourandminuteofthereset(usingthe24‐hoursystem).
mm/dd (Optional)Schedulesthemonthanddayofthereset.
reason (Optional)Specifiesareasonforthereset.