Enterasys Matrix DFE-Gold Series

Configuring OSPF debug ip ospf
21-50 Routing Protocol Configuration
debug ip ospf
UsethiscommandtoenableOSPFprotocoldebuggingoutput.
Syntax
debug ip ospf {subsystem}
no debug ip ospf {subsystem}
Parameters
Defaults
None.
Mode
Routercommand,PrivilegedEXEC:Matrix>Router#
Usage
The“no”formofthiscommanddisablesOSPFprotocoldebuggingoutput.
Example
ThisexampleshowshowtoenableOSPFprotocoldebuggingoutputtodisplayinformationabout
LinkStateAdvertisementgeneration:
Matrix>Router#debug ip ospf lsa-generation
rfc1583compatible
UsethiscommandtoenabletheOSPFrouterforRFC1583compa tibility.
Syntax
rfc1583compatible
no rfc1583compatible
Parameters
None.
Defaults
None.
subsystem SpecifiestheOSPFsubsystemforwhichprotocoldebuggingwillbe
enabled.Validentriesandtheirassociatedoutputsare:
• adj‐OSPFadjacencyevents
• flood‐OSPFflooding
• lsa‐generation‐OSPFLinkStateAdvertisementgeneration
• packet‐OSPFpackets
• retransmission‐OSPFretransmissionevents