Enterasys Matrix DFE-Gold Series

ip dhcp pool DHCP Overview
Enterasys Matrix DFE-Gold Series Configuration Guide 20-9
Usage
The“no”formofthiscommandresetsthepingtimeouttothedefaultvalue.
Example
ThisexampleshowshowtosettheDHCPpingtimeoutto900milliseconds:
Matrix>Router(config)#ip dhcp ping timeout 900
ip dhcp pool
UsethiscommandtoassignanametoaDHCPserverpoolofaddresses,andtoenableDHCP
addresspoolconfigurationmode.
Syntax
ip dhcp pool name
no ip dhcp pool name
Parameters
Defaults
None.
Mode
Routercommand,Globalconfiguration:Matrix>Router(config)#
Usage
The“no”formofthiscommanddeletesaDHCPaddresspool.
Example
Thisexampleshowshowtoassignthename“localpool”asaDHCPaddresspool,andenable
configurationmodeforthataddresspool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#
domain-name
UsethiscommandtoassignadomainnametoaDHCPclient.
Syntax
domain-name domain
no ip dhcp domain-name domain
name SpecifiesaDHCPaddresspoolname.
Note: This must match the previously configured name assigned with the ip
local pool command as described in “ip local pool” on page 20-6.