Configuring RMON set rmon matrix properties
11-34 Network Monitoring Configuration
set rmon matrix properties
UsethiscommandtoconfigureanRMONmatrixentry.
Syntax
set rmon matrix properties index port-string [owner]
Parameters
Defaults
Ifownerisnotspecified,monitorwillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoconfigureRMONmatrixentry1forfe.1.1
Matrix(rw)->set rmon matrix properties 1 fe.1.1
set rmon matrix status
UsethiscommandtoenableanRMONmatrixentry.
Syntax
set rmon matrix status index enable
Parameters
Defaults
None.
Octets Number of octets (excluding framing bits, but including FCS octets)
contained in all packets transmitted from the source address to the
destination address.
Errors Errors recorded.
Table 11-7 show rmon matrix Output Details (continued)
Output... What it displays...
index Specifiesanindexnumberforthisentry.Anentrywillautomaticallybe
createdifanunusedindexnumberischosen.Maximumnumberof
entriesis2.Maximumvalueis65535.
port‐string Specifiesport(s)onwhichtomonitorsstatistics.
owner (Optional)Specifiesthenameoftheentitythatconfiguredthisentry.
index Specifiesanindexnumberforthisentry.Maximumnumberofentriesis
2.Maximumvalueis65535.
enable Enablesordisablesthismatrixentry.
To Next Page
Loading...
Need help?
General