Enterasys Matrix DFE-Gold Series

Configuring Multiple Authentication show multiauth counters
27-4 MultiAuth Configuration
Example
Thisexampleshowshowtodisplaymultipleau thenticationsession‐timeoutvalues,foranactive
session:
Matrix(su)->show multiauth
Multiple authentication system configuration
-------------------------------------------------
Supported types : dot1x, pwa, mac, cep
Maximum number of users : 2048
Current number of users : 1
System mode : multi
Default precedence : dot1x, pwa, mac, cep
Admin precedence : dot1x, mac, pwa, cep
Operational precedence : dot1x, mac, pwa, cep
show multiauth counters
Usethiscommandtodisplaymultiauthcountervalues.
Syntax
show multiauth counters [[cep | dot1x | mac | pwa][chassis | port portstring]]
[[chassis [cep | dot1x | mac | pwa]] [port portstring]
Parameters
Defaults
Displaysmultiauthcounterinformationforallparameters.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowshowtodisplaymultipleau thenticationsession‐timeoutvalues,foranactive
session:
Matrix(su)->show multiauth counters
Location Authentication Type
dot1x pwa mac cep
---------- ---------- ---------- ----------
chassis 0 0 0 0
ge.1.1 0 0 0 0
ge.1.2 0 0 0 0
.
.
.
lag.0.45 0 0 0 0
portstring Specifiesaportorrangeofportstodisplay.