show lldp port local-info Link Layer Discovery Protocol and LLDP-MED
Enterasys Matrix DFE-Gold Series Configuration Guide 3-21
Parameters
Defaults
Ifport‐stringisnotspecified,localsysteminformationwillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Usage
Youcanusethisinformationtodetectmisconfigurationsorincompatibilitiesbetweenthelocal
portandtheattachedendpointdevice(remoteport).
Example
Thisexampleshowshowtodisplaythelocalsysteminformationstoredforportfe.4.1.Table 3‐4
describestheoutputfieldsofthiscommand.
Matrix(rw)->show lldp port local-info fe.4.1
Local Port : fe.4.1 Local Port Id: fe.4.1
--------------------
Port Desc : ... 100BASE-TX RJ21 Fast Ethernet Frontpanel Port
Mgmt Addr : 10.21.64.100
Chassis ID : 00-E0-63-93-74-A5
Sys Name : LLDP PoE test Chassis
Sys Desc : Enterasys Networks, Inc. Matrix E7 Gold Rev 05.41
Sys Cap Supported/Enabled : bridge,router/bridge
Auto-Neg Supported/Enabled : yes/yes
Auto-Neg Advertised : 10BASE-T, 10BASE-TFD,
100BASE-TX, 100BASE-TXFD,
1000BASE-TFD,
Bpause
Table 3‐4describestheinformationdisplayedbytheshowlldpportlocal‐infocommand.
port-string (Optional)Displayslocalsysteminformationforoneorarangeof
ports.
Table 3-4 show lldp port local-info Output Details
Output... What it displays...
Local Port Identifies the port for which local system information is displayed.
Local Port Id Mandatory basic LLDP TLV that identifies the port transmitting the
LLDPDU. Value is ifName object defined in RFC 2863.
Port Desc Optional basic LLDP TLV. Value is ifDescr object defined in RFC 2863.
Mgmt Addr Optional basic LLDP TLV. IPv4 address of host interface.
Chassis ID Mandatory basic LLDP TLV that identifies the chassis transmitting the
LLDPDU. Value is MAC address of chassis.