Enterasys Matrix DFE-Gold Series User Manual

clear snmp group Configuring SNMP Users, Groups and Communities
Enterasys Matrix DFE-Gold Series Configuration Guide 5-15
Example
Thisexampleshowshow tocreateanSNMPgroupcalled“anyone”,assignausernamed“public”
andassignSNMPv3securitytothegroup:
Matrix(rw)->set snmp group anyone user public security-model usm
clear snmp group
UsethiscommandtoclearSNMPgroupsettingsgloballyorforaspecificSNMPgroupanduser.
Syntax
clear snmp group groupname user [security-model {v1 | v2c | usm}]
Parameters
Defaults
Ifnotspecified,settingsrelatedtoallsecuritymodelswillbecleared.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoclearallsettingsassignedtothe“public”userwithintheSNMPgroup
“anyone”:
Matrix(rw)->clear snmp group anyone public
show snmp community
UsethiscommandtodisplaySNMPcommunitynamesandstatus.InSNMPv1andv2,
communitynamesactaspasswordstoremotemanagement.
Syntax
show snmp community [name]
Parameters
Defaults
Ifnameisnotspecified,informationwillbedisplayedforallSNMPcommunities.
Mode
Switchcommand,Read‐Only.
groupname SpecifiestheSNMPgrouptobecleared.
user SpecifiestheSNMPusertobecleared.
security‐modelv1|
v2c|usm
(Optional)Clearsthesettingsassociatedwithaspecificsecuritymodel.
name (Optional)DisplaysSNMPinformationforaspecificcommunityname.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English