Understanding RADIUS Snooper show radius-snooping session
26-10 RADIUS Snooping Configuration
Total RADIUS Access Accepts : 212
Total RADIUS Access Rejects : 26
Invalid RADIUS Request packets : 0
Invalid RADIUS Response packets: 0
Total Dropped Packets : 0
show radius-snooping session
UsethiscommandtodisplayanRSsummaryforallsessionsorthespecifiedportorMACaddress
criteria.
Syntax
show radius-snooping session {port port-string | mac mac-address}
Parameters
Table 26-3 Radius-Snooping Flow Settings
Output... What it displays...
FlowID Specifies the index ID for this flow.
Client IP Specifies the client IP address for this flow.
Server IP Specifies the server IP address for this flow.
UDP Port Specifies the authentication server UDP port for this flow.
Validation Specifies enabled if there is a secret configured, otherwise
specifies disabled. For security reasons the secret does not
display.
Number of current sessions Specifies the number of active sessions for this flow.
Number pending Specifies the number of valid RADIUS request frames pending,
but no matching RADIUS response frame has been seen. These
sessions are currently inactive.
Total Sessions Specifies the total number of sessions on this system.
Total RADIUS Access Requests Specifies the total number of RADIUS access requests seen by
RS on this system.
Total RADIUS Access Rejects Specifies the total number of RADIUS response reject frames
seen by RS on this system.
Invalid RADIUS Request Packets Specifies the total number of RADIUS request frames seen by the
RS on this system.
Invalid RADIUS Response Packets Specifies the total number of Invalid RADIUS response frames
seen by RS on this system. An invalid frame is generated when
request frames do not contain the necessary attributes with the
required values for successful processing.
Total Dropped Packets Specifies the total number of frames dropped by RS on this
system.
portport‐string Specifiestheport(s)sessiontodisplay.Enter*.*.*forallports.
macmac‐address SpecifiestheMACaddresssessiontodisplay