Enterasys Matrix DFE-Gold Series User Manual

Setting Basic Device Properties set system name
2-50 Startup and General Configuration
set system name
Usethiscommandtoconfigureanameforthesystem.
Syntax
set system name [string]
Parameters
Defaults
Ifstringisnotspecified,thesystemnamewillbecleared.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtosetthesystemnametoInformationSystems:
Matrix(rw)->set system name “Information Systems”
set system location
Usethiscommandtoidentifythelocationofthesystem.
Syntax
set system location [string]
Parameters
Defaults
Ifstringisnotspecified,thelocationnamewillbecleared.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosetthesystemlocationstring:
Matrix(rw)->set system location “Bldg N32-04 Closet 9”
string (Optional)Specifiesatextstringthatidentifiesthesystem.
Note: A name string containing a space in the text must be enclosed in quotes
as shown in the example below.
string (Optional)Specifiesatextstringthatindicateswherethesystemis
located.
Note: A location string containing a space in the text must be enclosed in
quotes as shown in the example below.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English