Enterasys Matrix DFE-Gold Series User Manual

Configuring Spanning Tree Bridge Parameters clear spantree fwddelay
6-28 Spanning Tree Configuration
addition,eachportneedstimetolistenforconflictinginformationthatwouldmakeitreturntoa
blockingstate;otherwise,temporarydataloopsmightresult.
Example
Thisexampleshowshowtogloballysetthebridgeforwarddelayto16seconds:
Matrix(rw)->set spantree fwddelay 16
clear spantree fwddelay
UsethiscommandtoresettheSpanningTreeforwarddelaytothedefaultsettingof15seconds.
Syntax
clear spantree fwddelay
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtogloballyresetthebridgeforwarddelay:
Matrix(rw)->clear spantree fwddelay
show spantree autoedge
Usethiscommandtodisplaythestatusofautomaticedgeportdetection.
Syntax
show spantree autoedge
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English