Enterasys Matrix DFE-Gold Series

show lldp Link Layer Discovery Protocol and LLDP-MED
Enterasys Matrix DFE-Gold Series Configuration Guide 3-17
show lldp
UsethiscommandtodisplayLLDPconfigurationinformation.
Syntax
show lldp
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplayLLDPconfigurationinformation.
Matrix(ro)->show lldp
Message Tx Interval : 30
Message Tx Hold Multiplier : 4
Notification Tx Interval : 5
MED Fast Start Count : 3
Tx-Enabled Ports : ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12; tg.6.1-2; fe.7.1-48
Rx-Enabled Ports : ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12;tg.6.1-2; fe.7.1-48
Trap-Enabled Ports : ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12; tg.6.1-2; fe.7.1-48
MED Trap-Enabled Ports : ge.1.1-60; ge.2.1-24; ge.3.1-30; ge.4.1-12;
ge.5.1-12;tg.6.1-2; fe.7.1-48
clear lldp 3-34
clear lldp port status 3-34
clear lldp port trap 3-35
clear lldp port med-trap 3-35
clear lldp port location-info 3-36
clear lldp port network-policy 3-36
clear lldp port tx-tlv 3-37
For information about... Refer to page...