Enterasys Matrix DFE-Gold Series

Setting Basic Device Properties set summertime
2-42 Startup and General Configuration
End : SUN NOV 04 02:00:00 2007
Offset: 60 minutes (1 hours 0 minutes)
Recurring: yes, starting at 2:00 of the second Sunday of March and ending at 2:00
of the first Sunday of November
set summertime
Usethiscommandtoenableordisablethedaylightsavingstimefunction.
Syntax
set summertime {enable | disable} [zone]
Parameters
Defaults
Ifazonenameisnotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtoenabledaylightsavingstimefunction:
Matrix(rw)->set summertime enable
set summertime date
Usethiscommandtoconfigurespecificdatestostartandstopdaylightsavingstime.
Syntax
set summertime date start_month start_date start_year start_hr_min end_month
end_date end_year end_hr_min [offset_minutes]
Parameters
enable|disable Enablesordisablesthedaylightsavingstimefunction.
zone
(Optional)Appliesanametothedaylightsavingstimesettings.
start_month
Specifiesthemonthoftheyeartostartdaylightsavingstime.
start_date
Specifiesthedayofthemonthtostartdaylightsavingstime.
start_year
Specifiestheyeartostartdaylightsavingstime.
start_hr_min
Specifiesthetimeofdaytostartdaylightsavingstime.Formatis
hh:mm.
end_month
Specifiesthemonthoftheyeartoenddaylightsavingstime.
end_date
Specifiesthedayofthemonthtoenddaylightsavingstime.
end_year
Specifiestheyeartoenddaylightsavingstime.