Assigning Classification Rules to Policy Profiles set policy allowed-type
8-18 Policy Classification Configuration
Example
Thisexampleshowshowtoshowinformationaboutpoliciesallowedonportge.1.5:
Matrix(rw)->show policy allowed-type ge.1.5
SUPPORTED AND ALLOWED TRAFFIC RULE TYPES
o Means Traffic Rule Type is supported on this bridge port
* Means Traffic Rule Type is supported and allowed on this bridge port
======================================================================
| | TRAFFIC RULE TYPES |
+--------------+---+-----------+-----+-----+---+---+-+-----+---+---+-+
| | | | | | | | | | | | |
| |MAC| IPX |IPv6 | IP |UDP|TCP| | IP | | | |
| | | | | | | | | | | | |
| | | S D | | | | | | |E | | |
| | | S S T| F| F| | |I| T|N |V |P|
| |S D|S D O O C Y|S D L|S D R|S D|S D|C|T T Y|E L|L T|O|
| |R S|R S C C O P|R S O|C S A|R S|R S|M|T O P|T L|A C|R|
| |C T|C T K K S E|C T W|R T G|C T|C T|P|L S E|2 C|N I|T|
| |---+-----------+-----+-----+---+---+-+-----+---+---+-+
| | | | 1 1|1 1 1|1 1|1 1|1|2 2 2|2 2|2 2|3|
| Port |1 2|3 4 5 6 7 8|9 0 1|2 3 4|5 6|7 8|9|0 1 2|5 6|7 8|1|
======================================================================
| ge.1.5 |* *|* * * * * *| |* * *|* *|* *|*| * *|* *|* *|*|
set policy allowed-type
Usethiscommandtoassignalistoftrafficrulesthatcanbeappliedtotheadminprofileforoneor
moreports.
Syntax
set policy allowed-type port-string traffic-rule rule-list [append | clear]
Parameters
Defaults
Ifappendorclearisnotspecified,rule(s)willbeappendedtotheport’scurrentlist.
port‐string Specifiesport(s)onwhichtoapplytrafficrules.
traffic‐rulerule‐list Specifiestrafficrulestobeallowed.Thisisanumericvaluedisplayedin
theshowpolicyallowed‐typeoutput(“showpolicyallowed
‐type”on
page 8‐17).Entering“none”meansthatnotrafficruleswillbeallowed
onthisport.
append|clear (Optional)Appendstrafficrule(s)totheport(s)currentrules,orclears
specifiedrules.
To Next Page
Loading...
Need help?
General