Enterasys Matrix DFE-Gold Series

set multiauth precedence Configuring Multiple Authentication
Enterasys Matrix DFE-Gold Series Configuration Guide 27-5
lag.0.46 0 0 0 0
lag.0.47 0 0 0 0
lag.0.48 0 0 0 0
set multiauth precedence
Usethiscommandtosetthesystem’smulti pleauthenticationadministrativeprecedence.
Syntax
set multiauth precedence {[dot1x] [mac] [pwa] [cep]}
Parameters
Defaults
Fromhightolowprecedence:dot1x,pwa,mac,cep.
Mode
Switchcommand,Read‐Write.
Usage
Whenauserissuccessfullyauthenticatedbymorethanonemethodatthesametime,the
precedenceoftheauthenticationmethodswilldeterminewhichRADIUS‐returnedfilterIDwillbe
processedandresultinanappliedtrafficpolicyprofile.
Example
ThisexampleshowshowtosetprecedenceforMACauthentication:
Matrix(rw)->set multiauth precedence mac
clear multiauth precedence
Usethiscommandtoclearthesystem’smultipleauthenticationadministrativeprecedence.
Syntax
clear multiauth precedence
Parameters
None.
Defaults
None.
dot1x Setsprecedencefor802.1Xauthentication.
mac SetsprecedenceforMACauthentication.
pwa Setsprecedenceforportwebauthentication.
cep SetsprecedenceforCEPauthentication