Enterasys Matrix DFE-Gold Series

set cli completion Setting Basic Device Properties
Enterasys Matrix DFE-Gold Series Configuration Guide 2-45
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtosetthecommandprompttoSwitch1:
Matrix(rw)->set prompt “Switch 1”
Switch 1(rw)->
set cli completion
UsethiscommandtoenableordisabletheCLIcommandcompletionfunction.Whenenabled,this
allowsyoutocompleteauniqueCLIcommandfragmentusingthekeyboardspacebar.
Syntax
set cli completion {enable | disable} [default]
Parameters
Defaults
Ifnotspecified,thestatussettingwillnotbemaintainedasthedefault.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenabletheCLIcommandcompletionfunctionandmaintainitasthe
defaultsetting:
Matrix(rw)->set cli completion enable default
loop
Usethiscommandtoexecuteacommandloop.
Syntax
loop count [delay] [-r]
enable|disable EnablesordisablestheCLIcommandcompletionfunction.
default (Optional)Maintainsthestatusforallfuturesessions.