Enterasys Matrix DFE-Gold Series

show cos state Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-23
show cos state
UsethiscommandtodisplaytheClassofServiceenablestate.
Syntax
show cos state
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtoshowtheClassofServiceenablestate:
Matrix(rw)->show cos state
Class-of-Service application is enabled
set cos state
UsethiscommandtoenableordisableClassofService.
Syntax
set cos state{enable | disable}
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoenableClassofService:
Matrix(rw)->set cos state enable
clear cos violation irl 8-40
clear cos all-entries 8-41
For information about... Refer to page...
enable|disable EnablesordisablesClassofServic.e