Configuring System Logging show logging buffer
10-14 System Logging Configuration
show logging buffer
Usethiscommandtodisplaythelast256messagesloggedonallblades.
Syntax
show logging buffer
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
Thisexampleshowsaportionoftheinformationdisplayedwiththeshowloggingbuffer
command
Matrix(rw)->show logging buffer
<165>Sep 4 07:43:09 10.42.71.13 CLI[5]User:rw logged in from 10.2.1.122 (telnet)
<165>Sep 4 07:43:24 10.42.71.13 CLI[5]User: debug failed login from 10.4.1.100
(telnet)