Enterasys Matrix DFE-Gold Series

exclude DHCP Overview
Enterasys Matrix DFE-Gold Series Configuration Guide 20-7
Defaults
None.
Mode
Routercommand,Globalconfiguration:Matrix>Router(config)#
Usage
The“no”formofthiscommandremovesthelocaladdresspool.
Example
Thisexampleshowshowtoconfigurealocaladdresspoolcalled“localpool”onIPsubnet
172.20.28.0/24.Maskcanalsobe expressedas255.255.255.0:
Matrix>Router(config)#ip local pool localpool 172.20.28.0/24
Matrix>Router(ip-local-pool)#
exclude
UsethiscommandtoexcludeoneormoreaddressesfromaDHCPlocaladdresspool.
Syntax
exclude ip-address number
no exclude ip-address number
Parameters
Defaults
None.
Mode
Routercommand,IPLocalPoolconfiguration:Matrix>Router(ip‐local‐pool)#
Usage
The“no”formofthiscommandremovestheaddressesfromthelistofaddressesexcludedfrom
thelocalpool.
Example
Thisexampleshowshowtoexclude2IPaddressesbeginningwith172.20.28.254fromthe
“localpool”addresspool:
Matrix>Router(config)#ip local pool localpool
Matrix>Router(ip-local-pool)#exclude 172.20.28.254 2
ip‐address SpecifiesthestartingIPaddresstobeexcludedfromthispool.
number Specifiesthenumberofaddressestobeexcluded.Validvaluesare1‐
65535.