Enterasys Matrix DFE-Gold Series

Configuring Simple Network Time Protocol (SNTP) clear timezone
13-10 SNTP Configuration
Defaults
Ifoffsethoursorminutesarenotspecified,nonewillbeapplied.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtosetthetimezonetoESTwithanoffsetofminus5hours:
Matrix(rw)->set timezone ETS -5 0
clear timezone
UsethiscommandtoremoveSNTPtimezoneadjustmentvalues.
Syntax
clear timezone
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowtoremoveSNTPtimezoneadjustmentvalues:
Matrix(rw)->clear timezone