EasyManua.ls Logo

Enterasys Matrix DFE-Gold Series

Enterasys Matrix DFE-Gold Series
944 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ip ospf transmit-delay Configuring OSPF
Enterasys Matrix DFE-Gold Series Configuration Guide 21-27
Mode
Routercommand,Interfaceconfiguration:Matrix>Router(config‐if(Vlan1))#
Usage
The“no”formofthiscommandresetstheretransmitintervalvaluetothedefault.
Example
ThisexampleshowshowtosettheOSPFretransmitintervalforVLAN1to20:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip ospf retransmit-interval 20
ip ospf transmit-delay
Usethiscommandtosettheamountoftimerequiredtotransmitalinkstateupdatepacketonan
interface.
Syntax
ip ospf transmit-delay seconds
no ip ospf transmit-delay
Parameters
Defaults
None.
Mode
Routercommand,Interfaceconfiguration:Matrix>Router(config‐if(Vlan1))#
Usage
The“no”formofthiscommandresetstheretransmitintervalvaluetothedefault.
Example
ThisexampleshowshowtosetthetimerequiredtotransmitalinkstateupdatepacketonVLAN
1at20seconds:
Matrix>Router(config)#interface vlan 1
Matrix>Router(config-if(Vlan 1))#ip ospf transmit-delay 20
seconds Specifiesthetransmitdelayinseconds.Validvaluesarefrom1to65535.
Default:1Second.

Table of Contents

Related product manuals