Enterasys Matrix DFE-Gold Series

Configuring PIM show ip pim rp-hash
17-10 PIM Configuration
show ip pim rp-hash
Usethiscommandtodisplaytherendezvouspoint(RP)thatisbeingselectedforaspecified
group.
Syntax
show ip pim rp-hash group-address
Parameters
Defaults
None.
Mode
Routercommand,PrivilegedEXEC:Matrix>Router#
Example
ThisexampleshowshowtodisplayRPhashinformation:
Matrix>Router#show ip pim rp-hash
RP 192.168.41.1, via Bootstrap Router, uptime 07:50:10, expires 00:01:52
show ip mroute
UsethiscommandtodisplaytheIPmulticastrouting ta ble. 
Syntax
show ip mroute [unicast-source-address | multicast-group-address] [summary]
Parameters
Defaults
Ifnooptionalparametersarespecified,detailedinformationaboutallsourceanddestination
addresseswillbedisplayed.
Mode
Routercommand,Anyroutermode.
Usage
Thistableshowshowamulticastroutingprotocol,suchasPIMandDVMRP,willforwarda
multicastpacket.Informationinthetableincludessourcenetwork/maskandupstreamneighbors.
FormoreinformationonconfiguringDVMRP,referto“ConfiguringDVMRP”onpage 21‐52.
group‐address Displaysinformationaboutaspecif icgroupaddress.
unicast‐source‐address|
multicast‐group‐address
(Optional)Displaysinformationaboutaspecificunicastsourceaddress
ormulticastdestinationaddress.
summary (Optional)Displaysasummaryofinformation.