Enterasys Matrix DFE-Gold Series

persistence level Configuring Load Sharing Network Address Translation (LSNAT)
Enterasys Matrix DFE-Gold Series Configuration Guide 19-25
Parameters
Defaults
None.
Mode
Routercommand,SLBVirtualServerConfigurationmode:Matrix>Router(config‐slb‐vserver)#
Usage
Ifnoclientsarespecifiedwiththiscommand,allclientswillbeallowedtouseavirtualserver.
The“no”formofthiscommandremovespermissionforaclienttousethevirtualserver.
Example
Thisexampleshowshowtoallowaclientat100.12 .22.42255.255.255.0tousethevirtualserver
named“virtual‐lsnat”:
Matrix>Router(config)#ip slb vserver virtual-lsnat
Matrix>Router(config-slb-vserver)#client 100.12.22.42 255.255.255.0
persistence level
Usethiscommandtosetthetypeofbindingusedandthetimelimittoallowclientstoremain
boundtoanLSNATvirtualserver.
Syntax
persistence level [tcp | ssl | sticky] timeperiod
no persistence level {tcp | ssl | sticky}
ip‐address (Optional)Specifies aclient’sIPaddress.
network‐mask (Optional)Specifiesaclient’snetworkmask.