show lldp port tx-tlv Link Layer Discovery Protocol and LLDP-MED
Enterasys Matrix DFE-Gold Series Configuration Guide 3-19
Mode
Switchcommand,Read‐Only.
Usage
PortsareenabledtosendLLDPnotificationswiththesetlldpporttrapcommandandtosend
LLDP‐MEDnotificationswiththesetlldpportmed‐trapcommand.
Example
ThisexampleshowshowtodisplayLLDPporttrapinformationforallports.
Matrix(ro)->show lldp port trap
Trap-Enabled Ports :
MED Trap-Enabled Ports:
show lldp port tx-tlv
UsethiscommandtodisplayinformationaboutwhichoptionalTLVshavebeenconfiguredtobe
transmittedonports.
Syntax
show lldp port tx-tlv [port-string]
Parameters
Defaults
Ifport‐stringisnotspecified,TLVconfig urationinformationwillbedisplayedforallports.
Mode
Switchcommand,Read‐Only.
Usage
PortsareconfiguredtosendoptionalTLVswiththesetlldpporttx‐tlvcommand.
Example
ThisexampleshowshowtodisplaytransmitTLVinformationfor threeports.
Matrix(ro)->show lldp port tx-tlv ge.1.1-3
* Means TLV is supported and enabled on this port
o Means TLV is supported on this port
Means TLV is not supported on this port
Column Pro Id uses letter notation for enable: s-stp, l-lacp, g-gvrp
Ports Port Sys Sys Sys Mgmt Vlan Pro MAC PoE Link Max MED MED MED MED
port‐string (Optional)DisplaysinformationaboutTLVconfigurationforoneora
rangeofports.