Enterasys Matrix DFE-Gold Series User Manual

Managing the Management Authentication Notification MIB show mgmt-auth-notify
2-26 Startup and General Configuration
Managing the Management Authentication Notification MIB
Purpose
ThisMIBprovidescontrolsforenabling/disablingthesendingofSNMPnotificationswhenauser
loginauthenticationeventoccursforvariousmanagementaccesstypes.Thetypesofaccess
currentlysupportedbytheMIBincludeconsole,telnet,ssh,andweb.
Commands
TheCLIcommandsusedtosettheManagementAuthenticationNotificationarelistedbelowand
describedintheassociatedsectionasshown.
show mgmt-auth-notify
UsethiscommandtodisplaythecurrentsettingfortheManagementAuthenticationNotification
MIB.
Syntax
show mgmt-auth-notify
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaythecurrentinformationfortheManagementAuthentication
Notification.:
Matrix(su)->show mgmt-auth-notify
Management Type Status
--------------- --------
console enabled
For information about... Refer to page...
show mgmt-auth-notify 2-26
set mgmt-auth-notify 2-27
clear mgmt-auth-notify 2-28
Note: Ensure that SNMP is correctly configured on the DFE in order to send these notifications.
Refer to Chapter 5 for SNMP configuration information.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English