Enterasys Matrix DFE-Gold Series

DHCP Overview dns-server
20-10 DHCP Configuration
Parameters
Defaults
None.
Mode
Routercommand,AnyDHCPconfigurationmode.
Usage
ThiscommandconfiguresDHCPoption15.
The“no”formofthiscommanddeletesaDHCPdomainname.
Example
Thisexampleshowshowtoassignthe“mycompany.com”domainnametothe“localpool”
addresspool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#domain-name mycompany.com
dns-server
UsethiscommandtoassignoneormoreDNSserverstoDHCPclients.
Syntax
dns-server address [address2...address8]
no dns-server
Parameters
Defaults
Ifaddress2...address8isnotspecified,noadditionaladdresseswillbeconfigured.
Mode
Routercommand,AnyDHCPconfigurationmode.
Usage
ThiscommandconfiguresDHCPoption6.
The“no”formofthiscommanddeletestheDNSserverlist.
domain Specifiesadomainnamestring.
address SpecifiestheIPaddressofaDNSserver.
address2...
address8
(Optional)Specifies,inorderofpreference,upto7additionalDNS
serverIPaddress(es).