Enterasys Matrix DFE-Gold Series User Manual

show ip dhcp binding DHCP Overview
Enterasys Matrix DFE-Gold Series Configuration Guide 20-19
Parameters
Defaults
Iftypeisnotspecified,Ethernetwillbeapplied.
Mode
Routercommand,AnyDHCPconfigurationmode.
Usage
ThiscommandalsoenablesDHCPhostconfigurationmode.
The“no”formofthiscommandremovesthehardwareaddress.
Example
Thisexampleshowshowtospecify0001.f401.2710asanEthernetMACaddressforthe
“localpool”addresspool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#hardware-address 0001.f401.2710 ethernet
show ip dhcp binding
UsethiscommandtodisplayinformationaboutoneorallDHCPaddressbindings.
Syntax
show ip dhcp binding [ip-address]
Parameters
Defaults
Ifip‐addressisnotspecified,informationaboutalladdressbindingswillbeshown.
Mode
Routercommand,AnyDHCPconfigurationmode.
hardware‐address SpecifiestheMACaddressoftheclient’shardwareplatform.
type (Optional)Specifiesahardwareprotocolorclientclassname.Valid
valuesandtheircorrespondingmeaningsare:
• 1‐10MbEthernet
• 6orieee802‐IEEE802networks
• client‐classname‐Clientclass(configuredasdescribedin“
showip
dhcpbinding”onpage 20‐19).
• ethernet‐10MbEthernet
ip‐address (Optional)DisplaysbindingsforaspecificclientIPaddress.

Enterasys Matrix DFE-Gold Series Specifications

General

Brand	Enterasys
Model	Matrix DFE-Gold Series
Category	Switch
Language	English