Enterasys Matrix DFE-Gold Series

show ip pim rp Configuring PIM
Enterasys Matrix DFE-Gold Series Configuration Guide 17-9
Parameters
Defaults
Ifnooptionalparametersarespecified,allactiveRPswillbedisplayed.
Mode
Routercommand,PrivilegedEXEC:Matrix>Router#
Examples
ThisexampleshowshowtodisplayinformationaboutactiveRPs:
Matrix>Router#show ip pim rp
Group: 225.1.2.3, RP: 192.168.41.1, uptime 07:49:53, expires 00:02:09
ThisexampleshowshowtodisplayRPmappinginformation:
Matrix>Router#show ip pim rp mapping
PIM Group to RP Mapping:
Group(s): 228.3.3.3/32
RP: 41.41.1.1, via Static Configuration
Group(s): 224.0.0.0/4
RP: 192.168.41.1, Priority: 2, Expiry: 00:01:30, Uptime: 07:49:31
RP: 192.168.91.1, Priority: 5, Expiry: 00:01:30, Uptime: 07:49:31
Table 17‐4providesanexplanationofthecommandoutput.
group (Optional)DisplaysactiveRPsforanyexistingmulticastgroup(s).
mapping (Optional)DisplaysallRPmappings.
multicast‐group‐address (Optional)DisplaysRPinformationforaspecificmulticastgroupIP
address.
Table 17-4 show ip pim rp Output Details
Output... What it displays...
Group(s) Address of the multicast group(s) about which to display RP data.
RP Address of the RP for that group.
Priority RP priority value.
Expiry Period (in hours:minutes:seconds) in which the next bootstrap
message is due from this BSR.
Uptime Interval that this router has been up in hours:minutes:seconds.