Enterasys Matrix DFE-Gold Series

DHCP Overview default-router
20-12 DHCP Configuration
Parameters
Defaults
None.
Mode
Routercommand,AnyDHCPconfigurationmode.
Usage
ThiscommandconfiguresDHCPoption46.
The“no”formofthiscommanddeletestheNetBIOSnodetype.
Example
ThisexampleshowshowtospecifyhybridastheNetBIOSnodetypeforthe“localpool”address
pool:
Matrix>Router(config)#ip dhcp pool localpool
Matrix>Router(config-dhcp-pool)#netbios-node type h-node
default-router
UsethiscommandtoassignadefaultrouterlisttoDHCPclients.
Syntax
default-router address [address2...address8]
no default-router
Parameters
Defaults
Ifaddress2...address8isnotspecified,noadditionaladdresseswillbeconfigured.
Mode
Routercommand,AnyDHCPconfigurationmode.
type SpecifiestheNetBIOSnodetype.Validvaluesandtheircorresponding
typesare:
• h‐node—hybrid(recommended)
• b‐node—broadcast
• p‐node—peer‐to‐peer
• m‐mode—mixed
address SpecifiestheIPaddressofadefaultrouter.
address2...
address8
(Optional)Specifies,inorderofpreference,upto7additionaldefault
routerIPaddress(es).