Enterasys Matrix DFE-Gold Series

show cos port-config Configuring Policy Class of Service (CoS)
Enterasys Matrix DFE-Gold Series Configuration Guide 8-27
show cos port-config
UsethiscommandtodisplayClassofServiceportgroupconfigurations.
Syntax
show cos port-config [irl | txq] [group-type-index]
Parameters
Defaults
Ifnotspecified,allratelimitinginformationforallporttypeswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtoshowallClassofServiceportgroupconf igurationinformation:
Matrix(rw)->show cos port-config
* Percentage/queue (if any) are approximations based on
[(slices/queue) / total number of slices]
Transmit Queue Port Configuration Entries
----------------------------------------------------------------------
Port Group Name :DFE-P 16Q
Port Group :0
Port Type :0
Assigned Ports :ge.1.1-12
Arbiter Mode :Strict
Slices/queue :Q [ 0]: 0 Q [ 1]: 0 Q [ 2]: 0 Q [ 3]: 0
:Q [ 4]: 0 Q [ 5]: 0 Q [ 6]: 0 Q [ 7]: 0
:Q [ 8]: 0 Q [ 9]: 0 Q [10]: 0 Q [11]: 0
:Q [12]: 0 Q [13]: 0 Q [14]: 0 Q [15]: 64
Percentage/queue :Q [ 0]: 0% Q [ 1]: 0% Q [ 2]: 0% Q [ 3]: 0%
:Q [ 4]: 0% Q [ 5]: 0% Q [ 6]: 0% Q [ 7]: 0%
:Q [ 8]: 0% Q [ 9]: 0% Q [10]: 0% Q [11]: 0%
:Q [12]: 0% Q [13]: 0% Q [14]: 0% Q [15]: 100%
----------------------------------------------------------------------
Port Group Name :DFE-P 4Q
irl|txq (Optional)Displaysinboundratelimitingortransmitqueue
information.
group‐type‐index (Optional)Displaysinformationforaspecificportgroup/typeindex.
Validentriesareinthe formofgroup.type.Groupcanbe0‐7,with0
designatingthedefaultgroup,and1‐7reservedforuser‐defined
groups.Default
porttypevaluescannotbechanged,andare0forthe
7GR4270‐12,7G4270‐12,7G4270‐09,and7 G4270‐10DFEmodulesonly,
and1forallothermodules.