Configuring Debug IP Packet show debugging
16-32 IP Configuration
Parameters
None.
Defaults
None.
Mode
Routercommand,Routerconfiguration:Matrix>Router(config)#
RouterExec:Matrix>Router#
Usage
Bydefault,30packetwillbedisplayandthenthepacketmonitorwillstop.Tocollectanother30
packets,usethiscommand.Thedefaultof30canbemodifiedwiththedebugippacketaccess‐
grouplimitparameter.
Example
ThisexampleshowshowtorestartthedebugIPpacketutility:
Matrix(rw)->Router(config)#debug ip packet restart
show debugging
UsethiscommandtodisplaythedebugIPPacketutilitysettings.
Syntax
show debugging
Parameters
None.
Defaults
None.
Mode
Routercommand,Routerconfiguration:Matrix>Router(config)#
Example
ThisexampleshowshowtodisplaythedebugIP packetutilitysettings:
Matrix(rw)->Router(config)#show debug
IP Packet debugging is on, with access-group 1 throttle 5 limit 20 verbose
no debug ip packet
UsethiscommandtodisablethedebugIPpacketutility.
Syntax
no debug ip packet