Enterasys Matrix DFE-Gold Series

Setting Basic Device Properties set length
2-52 Startup and General Configuration
set length
UsethiscommandtosetthenumberoflinestheCLIwilldisplay.
Syntax
set length screenlength
Parameters
Defaults
None.
Mode
Switchcommand,Read‐Write.
Example
Thisexampleshowshowtosettheterminallengthto50:
Matrix(rw)->set length 50
show logout
Usethiscommandtodisplaythetime(inseconds)anidleconsoleorTelnetCLIsessionwill
remainconnectedbeforetimingout.
Syntax
show logout
Parameters
None.
Defaults
None.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaytheCLIlogoutsetting:
Matrix(rw)->show logout
Logout currently set to: 10 minutes.
screenlength SetsthenumberoflinesintheCLIdisplay.Validvaluesare0,which
disablesthescrollingscreenfeaturedescribedin“DisplayingScrolling
Screens”onpage 2‐10,andfrom5to512.