Enterasys Matrix DFE-Gold Series

Configuring SMON show smon vlan
11-10 Network Monitoring Configuration
Parameters
Defaults
Ifport‐stringisnotspecified,prioritystatisticswillbeclearedonallports.
Mode
Switchcommand,Read‐Write.
Example
ThisexampleshowshowclearSMONprioritystatisticson1‐GigabitEthernetsourceport14in
module3:
Matrix(rw)->clear smon priority ge.3.14
show smon vlan
UsethiscommandtodisplaySMON(SwitchedNetworkMonitoring)VLANstatistics.
Syntax
show smon vlan [port-string] [vlan vlan-id]
Parameters
Defaults
•Ifport‐stringisnotspecified,SMONstatisticsforallportswillbedisplayed.
•Ifvlan‐idisnotspecified,statisticsforallVLANswillbedisplayed.
Mode
Switchcommand,Read‐Only.
Example
ThisexampleshowshowtodisplaySMONVLAN1statist icsfor1‐GigabitEthernetport14in
module3:
Matrix(rw)->show smon vlan ge.3.14 vlan 1
Show VLAN Statistics
--------------------
Interface = ge.3.14
Owner = none
Creation = 0 days 16 hours 4 minutes 34 seconds
port‐string (Optional)Clearsstatisticsforspecificport(s).Foradetaileddescription
ofpossibleport‐stringvalues,referto“PortStringSyntaxUsedinthe
CLI”onpage 4‐2.
port‐string (Optional)DisplaysSMONVLANstatisticsbeingcollectedbyspecific
port(s).Foradetaileddescriptionofpossibleport‐stringvalues,referto
“PortStringSyntaxUsedintheCLI”onpage 4‐2.
vlanvlan‐id (Optional)DisplaysSMONstatisticsassociatedwithaspecificVLAN.